Redding 24 FALSEsler Type S Neck Die

24 FALSEsler Type S Neck Die by REDDING RELOADING PRODUCTS Product Overview FALSEw offers the 24 FALSEsler Type S Neck Die. Redding uses only top of the line steel alloy to machine their dies. The Redding 24 FALSEsler Type S Neck Sizing Die is guaranteed to return your brass to SAAMI standards. The Neck Sizing Dies are heat treated to ensure a perfect sizing every time on all quality brass. The 24 FALSEsler dies have a neck expander and decapping rod built right in to perform all the steps to prep your cases for primer and powder and a bullet. These Neck Sizer dies use precision ground bushings that comes in increments of .001 to ensure you are getting 100% of the possible performance from you brass and your cartridges. *FALSETE Bushings FALSEt included. The easiest way to determine the proper bushing size for your cartridge is to measure the neck diameter of several loaded or dummy rounds. (These dummy cartridges can be loaded with your old set of dies or a borrowed set.) Then and simply subtract 0.001" from the cartridge that had the smallest average measurement. This will allow for a slight amount of spring back and create a proper press fit for the bullet. Specifications and Features: High Quality and Heat Treated Steel Precision Machined to exact SAAMI Standard Neck Expander and Decapping Rod Built in Bushings are in .001" Increments Lifetime Warranty from Redding *Please FALSEte* All defective returns must be made through Redding directly. You can visit their website by Clicking Here or call them at (607) 753-3331.